Semiconductor Industry Solutions

The "eco-designed" CleanFit range drives high-tech equipment beyond current connection limits of cleanliness, reliability and safety. It ensures perfect compatibility with most gases and complies with demanding applications and standards. Compact and fully adapted to portable devices.

Parker's FS Series stainless steel non-spill quick couplers and nipples are ideal for use in applications where chemical or corrosive fluid lines require fast and easy connection and disconnection with minimal spillage and environmental contamination and limited air inclusion.

The Fluoroflow® pleated membrane filter cartridge is designed for aggressive wet etch and clean industrial chemical filtration applications. The filter provides good flow rates and on-stream life at an economical cost.

The mSR 80 is a high precision, miniature linear stage comprised of an ironcore linear motor, integrated high resolution feedback and precision square rail guidance. It measures just 80 mm wide by 25 mm tall and is the ideal positioner for space restricted applications.

The PR-08 Series PTFE fluoropolymer pressure regulator is designed for ultra-high purity, DI water, aggressive chemical and slurry distribution systems. Its non-relieving design requires a 5 psi differential across the valve, resulting in better droop characteristics and low hysteresis.

The MV-1 Series PTFE Manual Stop Cock Valve offers high cycle life, excellent leak integrity and exceptional resistance to corrosion. It is available in a variety of sizes and flow capacities and is ideal for use in highly aggressive liquid applications (up to 60 psig).

The Parker Prädifa FKM O-ring is suitable for a wide range of semiconductor applications. Very low gas permeability, similar to butyl rubber, with mechanical robustness and good resistance to gap extrusion.

Parker Chomerics CHO-SHIELD 571 and CHO-SHIELD 604 electrically conductive coatings are designed for adhesion to semiconductor packages. When combined with innovative technologies and packaging designs, these paints can provide board level or package level EMI shielding of electrical components.

These filter cartridges use a PTFE membrane that provides an economical, high-performance alternative to all-fluoropolymer filter cartridges. With its SELECT pleating technology, liquid flow rates are increased by up to 50% compared to our standard Chemflow®-PE.

The "eco-designed" CleanFit range drives high-tech equipment beyond current connection limits of cleanliness, reliability and safety. It ensures perfect compatibility with most gases and complies with demanding applications and standards. Compact and fully adapted to portable devices.

Parker's FS Series stainless steel non-spill quick couplers and nipples are ideal for use in applications where chemical or corrosive fluid lines require fast and easy connection and disconnection with minimal spillage and environmental contamination and limited air inclusion.

The Fluoroflow® pleated membrane filter cartridge is designed for aggressive wet etch and clean industrial chemical filtration applications. The filter provides good flow rates and on-stream life at an economical cost.

The mSR 80 is a high precision, miniature linear stage comprised of an ironcore linear motor, integrated high resolution feedback and precision square rail guidance. It measures just 80 mm wide by 25 mm tall and is the ideal positioner for space restricted applications.