Material Handling Industry Trends

This is a master display unit compliant with the IQANdesign platform system. The unit is fully programmable for use in any machine application as a master controller, a graphical user interface and as a CAN gateway.

Parker fixed displacement gear pumps offer high pressure durability due to their cast iron construction, making them ideal for high duty cycles in material handling. They’re available as a standard pump, clutch pump, and tandem pump and feature three-piece construction for distribution flexibility.

Engineered to meet and exceed ISO 18752 performance specifications, GlobalCore 187 hose offers 1,000 PSI constant working pressure and is designed to excel in rugged environments and high impulse applications. Constructed with a synthetic rubber inner tube for a wider range of fluid compatibilities.

Parker’s family of inertial tilt sensors protect material handling equipment and workers by providing operators fast, accurate feedback on angle of tilt, pitch, and roll. They can also be chassis mounted on vehicles with lifting booms and provide real-time information for auto leveling capability.

The MA180 is a closed center load sense valve developed for the material handling market. The valve is economically designed using a 2-section mono-block with stackable auxiliary sections. Component durability has been proven through lab testing in parallel with on-vehicle real-world testing.

Engineers are downsizing internal combustion engines to lower emissions. Doing so requires them to find alternative power for auxiliary functions, such as steering systems. Parker’s best-in-class GVM permanent magnet motors, electric generators and electro-hydraulic pumps provide the power needed.

The Seal-Lok O-Ring Face Seal offers a leak-free seal fitting design and rugged construction, making it optimal for use in high-pressure, vibration and impulse environments. Available in steel and stainless steel, our fittings exceed SAE corrosion requirements, for extended equipment life.

Parflex over-the-sheave hoses can withstand the strains of continual flexing. Often materials on forklifts shift in transit, meeting the mast and the hydraulic hoses on the mast, a known reason for hose failure. Installing a hose with superior abrasion resistance will extend the hose life.

Our rebranded Spin-On Low Pressure Filter Series are cost effective yet uncompromising in performance and quality. Max allowable operating pressure of 150 PSI/10.3 Bar and capable of flows up to 50 GPM/190 LPM depending on viscosity.

Parker's non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion.

This is a master display unit compliant with the IQANdesign platform system. The unit is fully programmable for use in any machine application as a master controller, a graphical user interface and as a CAN gateway.

Parker fixed displacement gear pumps offer high pressure durability due to their cast iron construction, making them ideal for high duty cycles in material handling. They’re available as a standard pump, clutch pump, and tandem pump and feature three-piece construction for distribution flexibility.

Engineered to meet and exceed ISO 18752 performance specifications, GlobalCore 187 hose offers 1,000 PSI constant working pressure and is designed to excel in rugged environments and high impulse applications. Constructed with a synthetic rubber inner tube for a wider range of fluid compatibilities.

Parker’s family of inertial tilt sensors protect material handling equipment and workers by providing operators fast, accurate feedback on angle of tilt, pitch, and roll. They can also be chassis mounted on vehicles with lifting booms and provide real-time information for auto leveling capability.